The oil leakage is not smooth or excessive pressure caused by the reducer.

Reducer leakage is a common problem, the cause of the oil spill may be the case of the quality of the box, the quality of oil, oil seal quality problems, Hakone, external pressure and other issues, and if too many of the oil filler will lead to overflow. Once the oil spill should be based on the actual situation to take measures, we will introduce a simple method of processing.

If it is a worm gear reducer casting quality does not pass through the oil spill, can first use gasoline and other cleaner to clean the oil spill, and then inject the concentration of 20% hydrochloric acid, a day after removal of hydrochloric acid to clean, rely on chemical reaction to produce chlorine or chlorine.

The oil leakage caused by the oil leakage of the reducer. The oil of the reducer is not smooth and the oil can not be returned to the oil tank as soon as possible. The method can take is: the slowdown in the head set the oil seal, and oil ring blocking oil leaked, the oil flows back to the pool. Can the parting surface in a design of an annular oil return tank, the oil back into the box, a part of the flow of bearing lubrication. Gear box cleaning maintenance machine with gear box original to the discharge of the oil system and the filtration of the old oil can realize cleaning and waste oil to the gear box fast filtering, filling the new oil functions, operation process does not change hardware facilities, not to add the cleaning agent, ensure the operation safety of gear box, to extend the service life. Also this if the reduction of the use of the failure of the essential part of the process is also a lot of companies will be ignored.

The internal pressure of the reducer is greater than the external pressure is the main reason for the oil leakage. The greater the pressure difference, the more serious the leakage, so that it can take reasonable measures to pressure. In case of the case of a vent cap and vent plug, the pore size of the vent cap and vent plug is too small to increase the inside and outside pressure. Therefore, selection should check the main, can open the ventilation cap cover, reducer high speed running after a few minutes, touch the vent, such as hot air is aperture size is too small, you can change a large ventilation cap.